Vibro-Acoustics’ Seismic Equipment Restraint Brackets (SRB) series of standardized steel brackets formed to match most equipment base support frames and predrilled to facilitate securing floor-mounted equipment against seismic forces.  The brackets are designed for a wide range of seismic forces and include rubber grommet washers as appropriate to minimize shock forces at anchor locations – helping to ensure equipment not only stays in place during and after an extreme event but also remains operational.
August 24, 2017
SRB

Seismic Restraint Bracket

Vibro-Acoustics’ Seismic Equipment Restraint Brackets (SRB) series of standardized steel brackets formed to match most equipment base support […]
June 7, 2017
SIPS-1-3

Seismic Inline Pump Stands

Vibro-Acoustics Seismic Inline Pump Stands (SIPS) series provide rigid support and restraint for vertical inline pumps. These stands […]
May 30, 2017
EJE1

Rubber Expansion Joints

When equipment is vibration isolated, it’s essential to introduce flexibility on its connections. In addition to that, some […]
May 30, 2017
AHCS

Thrust Restraints

Vibro-Acoustics Thrust Restraint (HCS and AHCS) series provide resistance to horizontal motion due to thrust (for example, air […]
May 29, 2017
CTB

Steel Bases

Vibro-Acoustics’ steel bases provide a common support for mechanical equipment to increase rigidity and provide a method of […]
May 29, 2017
CIB

Concrete Inertia Bases

Vibro-Acoustics Concrete Inertia Bases (CIB) provide vibration and start-up torque damping by adding mass to and lowering the […]
May 29, 2017
GW

Grommet Washers

Vibro-Acoustics Grommet Washers (GW) provides a simple way to reduce vibrations and shock loads transferred to support rods […]
May 24, 2017
SFS-SA-500-1000

Seismic Free Spring

The Vibro-Acoustics Seismic Free Spring (SFS) series provide vibration isolation for mechanical systems and equipment. The SFS isolator […]
May 24, 2017
SRD

Seismic Rubber-in-Shear Mounts

Vibro-Acoustics Seismic Rubber-in-Shear Mounts (SRD) series provide mid- to high-frequency vibration isolation for floor-mounted equipment mounted on stiff […]
May 24, 2017
RD

Rubber-in-Shear Floor Mounts

Vibro-Acoustics Rubber-in-Shear Floor Mount (RD) series provide mid-to high-frequency vibration isolation for floor-mounted equipment mounted on stiff supporting […]
Skip to content